Not sure which grinder is right for you? Try one of our demo units for a week. Quantities are limited, so call today to learn how.

Piranha III Tungsten Grinder. This grinder is designed for maximum commercial use and includes a universal collet which will grind from .040.-3/16. The construction of the PIII unit is heavy solid steel and very user friendly. The Piranha III unit is also fully enclosed with a 90% containment of excess tungsten electrode dust. (20" x 12" x 12" - 51 lbs / 508mm x 304.8mm x 304.8mm - 23.13 kg)

• Continuous grinding of .040" - 3/16" (1.0 - 4.8mm) tungsten. Solid construction. No vibration.
• Longitudinal grinding for maximum arc stability.
• Precision scale for setup and repeatability.
• Electrode guide accommodates 6 electrode sizes.
• Capable of a wide range of included angles.
• Electrode notching station for simple cut-off.
• Electrode guide has square end grind position.
• Detailed Manual includes engineering data and welding recommendations.
• 6.0" diamond wheel improves your surface finish
• Vacuum port ready
  
  Piranha III Tungsten Grinder
  Price: $1,295.00
  

Sizes .040" (1.0mm) 1/16" (1.6mm) 3/32" (2.4mm) 1/8" (3.2mm) 5/32" (4.0mm) 3/16" (4.8mm)

DGP-PG3-V2 Price: $2,190.00 Same unit as above. Includes vacuum system as well as foam insulated cabinet and flexible spotlight.

Benefits

• Safety: Enclosed grinding area captures Tungsten dust for easy disposal.
  
• Weld Quality: 20 Ra surface finish improves Tungsten life, arc starting, arc stability & produces consistent weld penetration.
  
• Productivity: Correctly & consistently diamond grind your Tungsten Electrode (up to 3/16”) longitudinally in less than 30 seconds.
  
• Value: Diamond grinds, flats & notches your Tungsten economically.
  

Specifications

Range of Included Angle:
10 to 60 degrees

Electrode Diameters:
040" (1.0mm), 1/16" (1.6mm), 3/32" (2.4mm), 1/8" (3.2mm), 5/32" (4.0mm), 3/16" (4.8mm)

Minimum Electrode Length:
.75" (19.05mm)

Voltage:
100/120 VAC, 50/60Hz, 220v

Power Consumption:
500 Watts

Motor:
1/3 hp, 1,680 rpm, 5.0 amps

Dimensions:
Length: 20" (508mm)
Width: 12" (304.8mm)
Height: 12" (304.8mm)
Weight: 51 lbs (23.13 kg)